Final Assembly Continued
☐
Install nylon 4-40 x 3/8 in. bolts through tail
skid and horizontal stabilizer to retain
stabilizer assembly to fuselage.
☐
Connect pushrod to control horn at both
rudder and elevator then retain using Micro2
E/Z links provided with pushrod kit.
☐
Cut the three (3) provided 3/16 in. dia. dowels
to 4-1/4 in length and install centered within
fuselage assembly.
Retain dowels using medium CA glue.
☐
Install a 6 in. strip of sticky back hook and
loop tape (not provided) centered to fuselage
crutch to hold receiver and battery.
☐
Prepare motor and ESC for installation.
Outrunner motors should be setup for radial
style mounting.
© 2009 Stevens AeroModel all rights reserved.
Page 27 of 30
