Tail Feathers Continued
☐
Join elevator halves with basswood joiner.
Use a straight edge to align assembly.
☐
Using the “Carbon Bar Stock Cutting Guide”,
located on the plan sheet, cut each of the four
lengths of stock to proper lengths. Use
medium CA glue to bond carbon stock, in
lengths specified by plan set, to rudder,
elevator, and horizontal stabilizer assemblies.
Aileron Assembly
☐
Assemble a right and left aileron using the
plan set as a guide. Assemble each
component beginning with the outer
framework and finishing with the internal
truss. Bond using thin CA glue.
☐
Complete aileron assembly by cutting to
length and bonding carbon fiber bar stock in
locations indicated on the plan set. Use
medium CA glue to bond carbon stock to
aileron assembly.
© 2009 Stevens AeroModel all rights reserved.
Page 17 of 30
