Hull Construction Continued
☐
Assemble motor mount from ply parts M1,
M2, M3, and M5
☐
Bond balsa parts M4a and M4b together.
☐
Bond completed M4 assembly flat to motor
mount as illustrated.
☐
In order to get M4 to wrap over radius at top
of motor mount wet M4 with glass cleaner on
both front and back sides. Allow glass
cleaner to soften this part (usually 5-10 min).
☐
Gently wrap then bond softened part over
radius. Stress cracks that may develop in the
wood are easily filled with a quality balsa filler.
© 2010 Stevens AeroModel all rights reserved. V2.0 (11.10.2014)
Page 14 of 25
