Fuselage Construction
☐
Dry fit firewall F2 to Fuselage Crutch F1.
Etching faces forward.
(
Ensure etching on
F1 faces up, and etching on F2 faces
forward with “TOP” facing up.
DO NOT
GLUE.)
☐
Dry fit F3 to Crutch Assembly.
(
Ensure
etching faces forward.)
☐
Slide Crutch Assembly through lower hole in
F4, and seat in notch. Tack glue with thin CA.
(Ensure “TOP” faces up.)
☐
Assemble two “FD” Fuselage Doublers from
parts FDa and FDb.
☐
Tack glue crutch assembly to FD Fuselage
Doubler.
Note:
Tabs on crutch assembly will protrude
slightly on the other side of FD Fuselage
Doubler. These tabs will locate the Fuselage
Side
SkyBuggy © 2010 Stevens AeroModel all rights reserved.
Page 9 of 30
FDa
FDb
F3
F1
F2
F4
Dry Fit
Dry Fit
TOP
FD
FD
TOP
Forward
