© 2004 Stevens AeroModel.
Page 12 of 33
5.
Install F4a and F4b over wing saddle as indicated below. Secure with CA glue. Span F2, F3, F4a, and F4b
with the 1/16” ply battery tray BT1. Secure BT1 to F2, F3, F4a and F4b with CA glue (make a good strong joint
here use two to three applications of thin CA or one application of thick CA allowing time to cure in-between
applications)
6.
Fit Servo rail / fuselage doubler part SR1 inside fuselage to double FT1 servo pocket.
7.
Friction Fit former F5A to 1/8” fuselage gussets F5B to create former F5.