20
4. POSITIVE POWER CONNECTOR (+BAT)
: Connect to the positive battery
terminal using a minimum
13 AWG
cable. It is recommended to use a
1A
fuse
for external protection.
5. SMC INPUT:
Dedicated connection for connecting the SMC (Stetsom
Module Central). Through it, it is possible to access the resources of the
processor, without the need to use the application.
6. AUDIO INPUT WITH WIRE CONNECTION (HIGH INPUT):
HIGH INPUT type
audio connection with independent action (A and B). Check this manual
for the installation diagram for the radio/player harness.
7. AUDIO INPUT WITH RCA CONNECTION (INPUT)
: Double type RCA
connectors with independent actuation (A and B). Connect to the audio
output of the radio/player via RCA cables. Give preference to quality
shielded cables to avoid noise.
8. MAX LEDs (INPUT CHANNELS):
These LEDs act individually to indicate
signal saturation on the input channels.
9. COMMAND BUTTON:
Used to reset processor settings and updates. See
topic
“Reset factory settings”
.
10. AUDIO OUTPUTS CHANNELS (OUTPUT):
Individual RCA output
connections provide the audio processed with the parameters
performed in the processor.
11. LIMITER LEDs (OUTPUT CHANNELS):
These LEDs actuate when the
“LIMITER” function is in use. Each channel has a dedicated LED for
visualization of the actuation individually. The LEDs also act as output
saturation indicators.
