17
EN-US
Introduction
Thank you for choosing a Stetsom product!
The
STX2436BT
is a digital audio processor that offers a variety of high-
precision adjustments and settings to enhance the performance of
your audio system. Through Bluetooth communication, the processor’s
information can be viewed and configured remotely using smartphones
with Android or iOS systems. Its digital signal processor (DSP) allows
real-time modification of equalizations, crossover filters, alignment,
gain control, phase inversion, limiter, digital input/output routing, and
other treatments. Its exclusive sequencer feature (SEQUENCER) makes
it possible to configure the programmed startup and shutdown of up to
three products from the remote startup connections (S1, S2, and S3).
Before installing
Please read this manual carefully.
▪ All connections must be made with the product turned
OFF
.
▪ A fuse must be installed between the amplifier and the battery is
required to protect against overcurrent. The fuse needs to be installed
as close to the battery as possible. Choose an appropriate fuse for the
amplifier based on its consumption.
▪ Use the wire recommended in this manual to keep cables from
overheating cables and to obtain maximum power.
▪ Keep the cables as short as possible to increase sound fidelity and
avoid potential power losses.
▪ Route the installation cables as far away as possible from the
original vehicle wiring to prevent interference and noise in your
audio system.
