STERWINS 3276000660170, Инструкция по сборке, использованию и обслуживанию

Страница: 332 / 365

332
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
BR
EN
2.10 SERVICE
• Have your power tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
2.11 CHAIN SAW SAFETY WARNINGS:
• Keep all parts of the body away from the saw chain when the chain saw is
operating. Before you start the chain saw, make sure the saw chain is not
contacting anything
. A moment of inattention while operating chain saws may cause
entanglement of your clothing or body with the saw chain.
• Always hold the chain saw with your right hand on the rear handle and
your left hand on the front handle.
Holding the chain saw with a reversed hand
configuration increases the risk of personal injury and should never be done. NOTE For chain
saws designed with the guide bar on the left side, the reference to “right hand” and “left
hand” positioning is reversed.
• Wear safety glasses and hearing protection. Further protective equipment
for head, hands, legs and feet is recommended.
Adequate protective clothing will
reduce personal injury by flying debris or accidental contact with the saw chain.
• Do not operate a chain saw in a tree. Operation of a chain saw while up in a tree may
result in personal injury.
• Always keep proper footing and operate the chain saw only when standing
on fixed, secure and level surface.
Slippery or unstable surfaces such as ladders may
cause a loss of balance or control of the chain saw.
• When cutting a limb that is under tension be alert for spring back. When the
tension in the wood fibres is released the spring loaded limb may strike the operator and/or
throw the chain saw out of control.
• Use extreme caution when cutting brush and saplings. The slender material may
catch the saw chain and be whipped toward you or pull you off balance.
• Carry the chain saw by the front handle with the chain saw switched off and
away from your body. When transporting or storing the chain saw always
fit the guide bar cover.
Proper handling of the chain saw will reduce the likelihood of
accidental contact with the moving saw chain.
• Follow instructions for lubricating, chain tensioning and changing
accessories.
Improperly tensioned or lubricated chain may either break or increase the
chance for kickback.
• Keep handles dry, clean, and free from oil and grease. Greasy, oily handles are
slippery causing loss of control.