14 45 00-2
1.5
DELIVERY, STORAGE, AND HANDLING
A.
Store products in manufacturer's unopened packaging until ready for installation.
B.
Store and dispose of solvent-based materials, and materials used with
solvent-based materials, in accordance with requirements of local authorities having
jurisdiction.
1.6
PROJECT CONDITIONS
A.
Maintain environmental conditions (temperature, humidity, and ventilation) within
limits recommended by manufacturer for optimum results. Do not install products
under environmental conditions outside manufacturer's absolute limits.
1.7
WARRANTY
A.
Manufacturer's Warranty: Lift system shall be warranted for a minimum period of 2
years for parts and 1 year for labor. Hydraulic cylinder shall have a parts only
warranty of an additional four years. Guide rollers shall have a lifetime warranty; this
extended warranty covers parts only.
PART 2 PRODUCTS
2.1
MANUFACTURERS
A.
Acceptable manufacturer: Stertil-Koni USA, Inc., which is located at: 200 Log Canoe
Circle; Stevensville, MD 21666; Toll Free Tel: 800-336-6637; Tel: 410-643-9001;
Email:
request info ([email protected])
; Web:
B.
Requests for substitutions will be considered in accordance with provisions of
Section 00 26 00.
1. Requests for changes by the contractor on products, materials, equipment
and methods of construction required by the contract documents, after the
award, shall be considered requests for "substitutions", and shall follow the
procedures outlined within the bid documents for substitutions.
2.
Any substitution of the specified lift requiring modifications of foundation
system detailed will be the responsibility of the contractor.
3.
The contractor shall provide for any and all engineering and redesign of
foundation system as a result of substitution.
4.
Under no circumstances will extra payment be permitted as a result of
additional work to accommodate any equipment substitution.
2.2
MOBILE COLUMN LIFTS
A.
Mobile Column Lifts Model ST-1085-FWA(ebright) as manufactured by Stertil-Koni
USA, Inc.
1. General Description:
a.
A lifting system or set (consisting of up to 32 columns) for vehicles
shall be composed of interchangeable columns. The size of the set
shall be able to be configured by the operator at time of set up without
the need to modify the operating system. It shall be possible to operate
up to 480 columns within any facility. With a set of up to 32 columns, it
shall be possible to operate any single column, a pair of columns, or all
columns together, at the same time.
b. Each column shall contain its own power supply which consists of two
deep cycle (group 31) 12 VDC batteries combined to provide a stable
24 VDC power supply.
