stertil-KONI ST 1065-FWF, Руководство по обслуживанию и запасным частям

Страница: 46 / 132

Service and Parts manual (Version B) 46 Wireless
Symbol Description Function
switched back on again. Height difference
monitoring can also be switched back on from this
screen. This setting is not stored in memory, so
height difference monitoring is always switched
on after the system has been switched off and on
again.
Height
monitoring
This option ensures that the value at the
potentiometer input is replaced by a constant
value. The column will function normally without
the height differences being corrected. This can
be used to check whether the potentiometers (for
height measurement) are working properly. Height
monitoring must then be disabled.
If the height differences between the columns
become larger during raising and lowering, there
may be problems in the hydraulic circuit or other
mechanical faults.
The screen shows the message
<Height
monitoring off> . There is also an acoustic signal
when raising or lowering to alert the operator to
the fact that this service operation is active.
This setting stays active for 2 minutes and height
difference monitoring is then automatically
switched back on again. Height difference
monitoring can also be switched back on from this
screen. This setting is not stored in memory, so
height monitoring is always switched on after the
system has been switched off and on again