4
| STERO SD1 LOW TEMP DISHWASHER
START-UP CHECKLIST
BEFORE POWER IS APPLIED
____ 1. Check all utility service connections for tightness (electric, hot water and drain(s)).
____ 2. Verify drain is connected with air gap (per your local code) and properly draining.
____ 3. Check for any loose hardware.
____ 4. Check door wrap to table for interference.
____ 5. Check free rotation of wash/rinse arms.
____ 6. Check to see that all strainer pans and screens are in place.
AFTER POWER IS APPLIED AND WATER TURNED ON
____ 1. Verify water supply is connected properly and not leaking.
____ 2. Verify correct supply voltage and phase to machine and confirm with data plate ratings.
____ 3. Close door and allow machine to fill completely.
____ 4. Check wash tank to ensure 140° operating temperature after fill.
RUN A 1 MINUTE CYCLE
____ 1. Check operation of door interlock switch.
____ 2. Check for proper pump motor operation and check for leaks.
____ 3. Check wash tank for proper water level during start up and operation.
REINSTALL ANY PANELS REMOVED
