6
7
INsTallaTIoN
INsTallaTIoN
sTEP 3 – coNNEcTINg ThE waTEr suPPly
1
for Dolphin f version:
Fit the flexible pipe coming
from the faucet to the solenoid
valve housing.
IMpORTANT: Inlet and outlet
should follow the indicating
arrow in the solenoid housing
Note:
Make sure that the filter is
assembled between the housing
of the solenoid valve and the inlet
nipple.
2
The faucet is provided with
an inlet nipple, if needed, fit
the water supply inlet to the
adapter at the solenoid valve
housing.
3
Turn on the central water
supply and the shut-off valve
(angle valve) and check for
leaks.
1 INLET VERSION
2 INLETS VERSION
sTEP 4 – coNNEcTINg ThE PowEr sourcE
1
Connect the waterproof
connector coming from the
electronic unit to the solenoid
valve connector.
2
FOR BATTERY VERSION:
a. Install the battery box
slide on holder, on the wall
underneath the sink using
the two screws and anchors
provided.
b. Connect the waterproof
connector coming from the
electronic unit to the battery
box.
from the electroNic uNit
to the battery box
from the electroNic uNit
to the soleNoid valve
