6
FAUCET INSTALLATION
STEP 3 – CONNECTING THE POWER SOURCE
IMPORTANT: This product includes a self
adjusting sensor.
The ideal sensor range for the specific
location will be set automatically.
1
Connect the connectors between
the solenoid valve and the
electronic unit.
2
For battery versions:
Install the battery box on the wall
in the mirror compartment and
connect the battery connector.
For transformer versions:
Plug the transformer into the
electricity socket and make sure
the transformer connector is
connected to the sensor.
3
Wait about 10 seconds before you
put your hands within the sensor
range.
10
SECONDS
If the automatically adjusted sensor range is not satisfactory to your purposes,
please refer to the section entitled “Settings adjustment”.
Before
proceeding,
check that
no objects
are in front
of the sensor
besides the
washbasin.
