11
MAINTENANCE
FILTER CLEANING INSTRUCTIONS
The system is provided with one stainless steel filter preventing foreign particles
to enter the lines. It is recommended to clean the filters every six (6) months. If the
water flow has decreased, this may be because the filter is clogged. The filters can be
cleaned as follows:
1. Shut-off the water shut off valve.
2. Disassemble the faucet and remove the filter located between the solenoid hous-
ing and the flexible pipe.
3. Wash the filter under running water.
4. Reassemble the parts.
5. Make sure that there is no water leakage.
SOLENOID VALVE SERVICING
The solenoid valve diaphragm requires periodical cleaning every six (6) month.
Remove the diaphragm from the solenoid valve and examine it for dirt. in case it is
dirty or clogged, wash it under running water and reassemble it.
Do not attempt to dismantle the solenoid valve if you are unfamiliar with electronic
solenoid valves.
CARE AND CLEANING OF CHROME AND SPECIAL FINISHES
DO NOT use steel wool or cleansing agents containing alcohol, acid, abrasives, or the
like. Use of any prohibited cleaning or maintenance products or substances could
damage the surface of the shower. For surface cleaning of faucets use ONLY soap
and water, then wipe dry with clean cloth or towel. When cleaning bathroom tile, the
faucet should be protected from any splattering of harsh cleansers
