background image

INDEX

TECHNICAL DATA

PACK CONTENTS

PRE-INSTALLATION INFO

4-6 INSTALLATION

7-9 

SETTINGS ADJUSTMENT WITH REMOTE CONTROL

10 

BATTERY REPLACEMENT

11 

MAINTENANCE

12 

SPARE PARTS LIST

12 

WARRANTY

13 

SERVICE CHECK LIST

 

 

The information in this document reflects products at the date of printing. Stern Engineering Ltd  reserves the right,  subject to all applicable laws, at any time, at its sole discre-

tion, and without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or temporarily withdraw 

any of the forgoing from the market. All information in this document is provided “as is” without warranty of any kind, either expressed or implied, including but not limited 

to any implied warranties of merchantability, fitness for a particular purpose, or non-infringement. Stern Engineering Ltd  assumes no responsibility for errors or omissions in 

the information presented in this document. In no event shall Stern Engineering Ltd  be liable for any special, incidental, indirect or consequential damages of any kind, or any 

damages whatsoever arising out of or in connection with the use or performance of this information. The tradenames, trademarks, logos and service marks presented in this 

document, including their design, are the property of Stern Engineering Ltd or other third parties and you are not permitted to use them without the prior written consent of Stern 

Engineering Ltd  or such third party as may own them.

Содержание 280300

















Отзывы: