
44
Sterling Elite
2
XS-RS-Plus
15.0 Specification Sheets (eN 12184 & iSo 7176-15)
Sunrise Medical Logistics BV
Operating temp: -25degC to 50DegC
Groningenhaven 18-20, 3433
Storage temp: -40degC to 65degC
PE ,Nieuwegein, Netherlands
Moisture resistance: IPX4
T: +31 (0)30 - 60 82 182 Customer Service
No restrictions on humidity and air pressure
F: +31 (0)30 - 60 55 880
www.sunrisemedical.com
MoDel: SterliNG elite2 XS, rS
Maximum occupant
mass: 175 kg
The Sterling Elite2 XS, RS
conforms to the following
standards:
a) requirements and test
methods for static, impact
and fatigue strengths (ISO
7176-8)
b) power and control
systems for electric
wheelchairs requirements
and test methods (ISO
7176-14)
c) climatic test in accor-
dance with ISO 7176-9
d) requirements for resi-
stance to ignition in accor-
dance with ISO 7176-16
e) the product is specified
as a Class C power pro-
duct
f) all materials used on this
product conform to EN1021
parts 1 and 2
Note:
Measurments of
upholstered parts are
approximate. All other
measurments may be
subject to change
iSo 7176-15
MiN.
MAX.
coMMeNtS
Overall length
1390mm 1390mm standard configuration
Overall width
670mm
670mm
standard configuration
Total mass (with batteries)
132kg
132kg
standard configuration
Mass of the heaviest part
-
23kg
72 Ah Battery
Static stability downhill
-
15°
175kg User
Static stability uphill
-
15°
175kg User
Static stability sideways
-
15°
175kg User
Energy consumption (max. range)
-
44km
To ISO 7176-15
Dynamic stability uphill
-
10°-18% 175kg User
Obstacle climbing
-
100mm
standard configuration
Ramp transition
8
°
8
°
without high centring
Max. speed forward
15kph
standard configuration
Min. brake distance from max. speed -
4.5m
with standard programming
Max. speed reverse
-
50%
% of forwards speed
Effective seat depth
460mm
standard configuration
Effective seat width
475mm
standard configuration
Seat surface height
440mm
540mm
to scooter floor
Back rest angle
-45
°
+45°
from vertical
Back rest height
510mm
standard configuration
Fore / aft seat adjustment
-80mm
+80mm
from centre position
Seat weight with slide
22kg
standard configuration
Top of arm rest to seat
80mm
arm rest set at 90
°
Min. turning radius
1400mm standard configuration
Min. turn between walls
1850mm standard configuration
Nominal battery voltage
24V
24V
two 12V batteries
Reversing width
1600mm -----------
Controller cut-off voltage
16V
drive stops
Battery capacity
60Ah
72Ah
see options
Battery fusible links
-
150A
In-line fuse on each battery
Battery charger loom fusible link
-
15A
Battery charger
8A
10A
automatic cyclic
Max. kerb height
100mm
Ground clearance
110mm
Rear suspension travel
50mm
Unladen
Front suspension travel
25mm
Unladen
Rear wheel drive
-
-
3 wheel scooter
Scooter push force
100N
in freewheel
Crash tested
YES
Test to 7176-19
Tyre Pressure
1.8-2.0 bar, (25-28 P.S.I.)