43
Sterling Elite
2
XS-RS-Plus
12.1 StorAGe teMPerAtUre & HUMiDity:
Storage Temperature: Min: -40ºC Max: 65ºC
Relative Humidity ( non-condensing): Min:5% Max: 95%
12.2 SPeciAl SHiPPiNG reQUireMeNtS:
The scooter may be transported by road, rail, sea or air
and the batteries conform to IATA regulations.
cAUtioN!
Before you travel, please contact the appropriate carrier.
The travel operator will be able to supply details of any
special requirements/instructions.
Ensure that any detachable parts are secured with
•
your scooter or separately packed and labelled so
they do not get lost during loading and unloading.
Take this Owner’s Manual with you.
•
The carrier will need to refer to the following sections.
•
How to remove the seat, (Section 5.1, Page 17).
•
How to disconnect the batteries, (Section 5.3, Page
•
18).
How to disconnect the drive, (Section 4.7, Page 9).
•
12.3 MeDiUM to loNG terM StorAGe:
When storing your scooter for long periods of time (in
excess of one week), follow these simple instructions:
Fully charge the wheelchair for at least 24 hours.
Disconnect the batteries
cAUtioN!
Never store your scooter for medium to long periods of
time:
Outside.
•
In direct sunlight, (plastic parts may discolour).
•
Near a source of direct heat.
•
In a damp environment.
•
In a cold environment.
•
With the batteries connected, (even if the controller is
•
switched off).
Avoiding all of the above will minimise battery deep cycle
discharge and extend battery lifetime.
When returning the scooter to use, please reconnect the
batteries/battery boxes and charge the scooter for at
least 24 hours before using again.
12.4 WeiGHt oF DetAcHAble PArtS
PArt
WeiGHt kg
SeAt
22.8
FroNt bASKet
0.9
toP boX
1.9
leG reSt
1.9
AMPUtee PAD
0.8
bAttery boX liD
1.1
rAiSeD Foot PlAtForM
3.2
SeAt bAcK eXteNSioN
1.0
HeAD reSt
0.7
12.0 Shipping and Storage
13.0 Disposal
The symbols below, mean that in accordance with local
laws and regulations your product should be disposed of
separately from household waste.
When this product reaches the end of its life, take it to
the local collection point designated by local authorities.
The separate collection and recycling of your product at
the time of disposal will help conserve natural resources
and ensure that it is recycled in a manner that protects
the environment.
Note:
Ensure you are the legal owner of the product
prior to arranging for the product disposal in accordance
with the above.
14.0 torque Settings
WArNiNG!
Do not attempt to dismantle and/or reassemble the
•
scooter on an engineering level, or fit any
replacement parts or accessories if you are not
qualified/authorised to do so.
Always consult your approved Sunrise Medical
•
servicing agent.
The torque information supplied below will enable normal
routine maintenance tasks to be performed, (please also
see section 18).
GeNerAl torQUe SettiNGS
DeScriPtioN
torQUe vAlUe
M3 POZI PAN
2-3 Nm
M4 POZI PAN
3-4 Nm
M5 SKT HD CAP
4-5 Nm
M5 POZI PAN
4-5 Nm
M6 HEX HD
9-10 Nm
M6 BUTT HD
9-10 Nm
M6 SKT HD CAP
9-10 Nm
M8 HEX HD
15-20 Nm
M8 SKT HD CAP
15-20 Nm
M8 SKT BUTT HD
15-20 Nm
M10 HEX HD
20-25 Nm
M10 SKT BTT HD
20-25 Nm
SPeciFic torQUe SettiNGS
Front Wheel Axle Bolt
32-Nm
Rear Wheel Hub Studs
25Nm
Seat Stem Height Bolts
20 Nm
