Steris RELIANCE 400, Руководство оператора

Страница: 15 / 106

1-3
Safety Precautions Operator Manual 122994-513
CAUTION – POSSIBLE EQUIPMENT DAMAGE:
1
Vaseline is a registered trademark of Cheseborough Pond's Incorporated.
Always position each manifold and/or bottom rotary spray over a manifold connector before operating
unit. If manifolds and/or bottom rotary sprays are not positioned correctly, damage will result and unit
will be unable to effectively wash load.
Always position each accessory header over a manifold connector before operating unit. If accessory
headers are not positioned correctly, damage may result and unit will be unable to effectively wash load.
Always select a cycle appropriate for the items being processed. Failure to do so may result in product
damage.
Always use a silicone lubricant to lubricate squeeze tubes. Petroleum-based lubricants, such as Vase-
line
®
1
or grease, will cause squeeze tubes to melt.
Once chamber door has been lowered, ensure cable is correctly aligned and routed on all six cable pul-
leys.
Use nonabrasive cleaners when cleaning unit. Follow directions on containers and rub in a back-and-
forth motion (in same direction as surface grain). Abrasive cleaners will damage stainless steel.
Cleaners rubbed in a circular motion or applied with a wire brush or steel wool on door and chamber
assemblies can be harmful to stainless steel. Do not use these cleaners on painted surfaces.
When choosing a detergent, select one with a low-chloride content. Detergents with a high-chloride
content must not be used, as such detergents may harm stainless steel.