Steris Basil 3600, Руководство по установке

Страница: 12 / 29

2-3
Uncrating Instructions Uncrating/Installation Instructions 122997-217
2.3 Prepare Bedding
Dispenser For
Installation
NOTE: Do not remove protective adhesive paper from the exterior
cabinet panels until after utilities are connected.
1. Remove all tape from bedding dispenser.
2. Locate electrical box compartment keys located in an envelope
taped on bedding dispenser electrical box.
3. Remove envelope labeled «Customer Information» containing
Operator Manual (P122996-163) taped on bedding dispenser
electrical box. Ensure appropriate person receives Operator
Manual . Give keys to department supervisor.
IMPORTANT: Items needed to assemble bedding dispenser are
enclosed in a box labeled "Hardware" included inside Crate 1
(see number on sticker affixed on crate). "Hardware" box
contains spare bolts, washers, nuts and other items.
4. Discard all packing material removed during uncrating proce-
dures.
CAUTION – POSSIBLE EQUIP-
MENT HAZARD:
• After utilities are connected
to equipment, slowly remove
the protective adhesive
paper from the exterior cabi-
net panels to reduce the
level of static discharge.
• When removing adhesives
from stainless steel, use a
solvent specially formulated
for that purpose. Rub in a
back-and-forth motion (in
same direction as surface
grain). Solvent rubbed in a
circular motion or applied
with a wire brush or steel
wool on bedding dispenser
assemblies can be harmful
to stainless steel. Do not use
solvents on painted sur-
faces.