Steris AL-1000, Руководство по обслуживанию

Страница: 16 / 35

AL ‐ 1000 Installation ‐ Operation ‐ Service Manual P764333 ‐ 823 December 18, 2009
15
29. Position the Washer Interface Module in the washer in a convenient location for service.
30. Take communication cable coming from dosing system and remove insulation and strip four wire leads.
31. Connect four wire leads to spare cable connector/housing from service kit. Match wire colors accordingly
(red/red, black/black etc.) and connect to mating Washer Interface Module connector.
32. Disconnect internal washer pump control output cables from existing pumps and connect corresponding
pump signal connectors from Washer Interface Module. Tag washer connectors with chemical names
(Corresponding Dosing System Pumps: Pump 1 = Enzyme, Pump 2 = Detergent, Pump 3 = Lubricant, Pump 4 =
Alternate Detergent).