The LED signals the following conditions:
LED lights red: in the case of reverse connection
LED lights green: during charging procedure, goes out when finished
CAUTION
Only charge rechargeable batteries, there is a „risk of explosion“ when using batteries of another
type! Apply electrical contact to the 12 V rechargeable lead battery, observing the positive and
negative pole.
Apply electrical contact between the adapter cable and the charging plug of the device. Connect the
terminals to the rechargeable lead battery observing the positive and negative pole. Connect the black
terminal with the negative pole (-) and the red terminal with the positive pole (+).
Plug the charging device into the wall socket. Once the electrical contact is applied, the charging
procedure starts automatically. The LED flashes green and indicates the charging procedure.
Once the charging procedure is completed, the LED turns off. The rechargeable battery continues
to be buffered with a float charging current following the charging procedure. Once the charging
device is disconnected from the mains, the rechargeable battery can be disconnected from the
charging device.
LED
TERMINAL ADAPTER
TECHNICAL DATA
• For 12 V rechargeable lead (Pb) batteries
• Electronic protection against reverse polarity
• Electronic protection against overloading
• Electronic protection against short circuit
• Charging according to IUoU characteristic
• Automatic additional charge - floating charge
• Charging device can be used worldwide (100-240 V AC)
EN
Operation manual lead charging device
OPERATION MANUAL LEAD CHARGING DEVICE | 16
