Stereo Optical Optec 5000G INT, Справочное и инструкционное руководство

Страница: 21 / 23

Maintenance
Troubleshooting
In the event that the device does not work correctly, correct the problem according to the following
table before contacting your authorized distributor.
Suggested action:
If the device will not work at all
- Make sure that the power cord is connected properly
- Make sure that the cord of the power supply is connected properly. Make sure that the voltage
applied to the power outlet is within the specified range.
Contact STEREO OPTICAL or your authorized distributor if the above suggestions do not eliminate
the corresponding problem.
Cleaning
When the cover or panels of the device becomes soiled, wipe with a soft cloth. For stubborn soiling,
immerse the cloth in a neutral detergent diluted with water, wring it well, and wipe. Finally wipe with
a dry, soft cloth.
CAUTION
·Never use an organic solvent such as paint thinner.
The surface of the device may be damaged.
·Never use a sponge or cloth containing excessive moisture to wipe the device.
The water may leak into the inside of the device and cause device malfunction.
·If the fixation lamps are smeared, proper measurements cannot be performed.
20