Stereo Optical Optec 5000G INT, Справочное и инструкционное руководство

Страница: 8 / 23

Glare Function with
Optec
5000G
INT
The Optec
5000G
INT vision tester
was created to satisfy a growing concern among
occupational health professionals – glare.
It is difficult to perform job functions and everyday functions when there are varying intensities of
light entering the eye. Often, a bit of time is needed for your eyes to become acclimated with the
luminance and glare within a particular environment. This can be true with driving a car or
performing a specific job task.
Optec
5000G
INT
will help you to assess the time needed to
adjust and help to quantify your corresponding vision.
One simply needs to administer the acuity test with Optec 5000G INT with the glare function on
to gauge a patient’s acuity with this high-intensity radial glare source. This can be administered
in one of two ways:
1.
Have the patient place his head against the forehead actuator to administer the acuity test.
Press the “GLARE” button to activate the radial glare source. Administer the acuity test as
you would normally.
2. Have the patient place his head against the forehead actuator to administer the acuity test
after pressing the “GLARE” button to activate the radial glare source. Turn off the glare after
a predetermined amount of time and then immediately time how long it takes your patient to
identify a specific line of acuity.
The information obtained will allow you to identify candidates with the requisite vision for their
particular job function or determine if a patient does not meet the vision portion of the job
standards laid forth by the entity for which the screening is performed and their consultant
eye care professional.
7