Stereo Optical Optec 5000G INT, Справочное и инструкционное руководство

Страница: 18 / 23

Make certain that the instrument is operated in the following environment conditions:
Humidity 30% to 75%
No large amount of dust is contained in the air
Subdued ambient light
Locate instrument in a place free from vibration or impact
Locate instrument on a stable surface
· Be sure that a power outlet meets the power requirements.
If the supplied voltage is too high or low, the device may not deliver full performance and malfunc-
tion, or fire may result.
· Be sure to use the power supply that came with the device. Using any adapter other than the sup-
plied one may result in malfunction, or may void the warranty.
· Do not use an extension cord when supplying the device with the power.
· Be sure to connect using a grounded outlet. Electrical shock or fire may result in event of malfunc-
tion or electrical leakage.
· Never crush or pinch the power cord with heavy objects. Damage may result in electrical shock or
fire.
· Before connecting cables to the device turn the instrument OFF and disconnect the power cord of
the power supply from the power outlet.
Usage Precautions
CAUTION
The device has been tested and found to comply with the limits for the medical devices to the IEC
60601-1-2 and EN55011. These limits are designed to provide reasonable protection against harmful
interference in a typical medical installation. This device generates, uses and can radiate radio fre-
quency energy. If not installed and used in accordance with the instructions, may cause harmful
interference to other devices in the vicinity. However, there is no guarantee that the interference to
other devices, which can be determined by turning the device off and on, is caused by this instru-
ment. The user is encouraged to try to correct the interference by one or more of the following
measures :
- Reorient or relocate the receiving device.
- Increase the separation between the device.
1
7