Stepmaniax Machine Setup
6. On the front of
each
stage, remove
the two screws securing the
power
outlet
. Once disconnected, remove the
remainder of the power outlet.
7. Take the stage connection assembly
and plug the two
power
and two
USB
cables into the connections on the
lower front of the main cabinet. The
order of the plugs does not matter.
Attach the tube to the main cabinet
using 4 screws.
8. Take the stage connection assembly’s
two separate ends and on
each
stage
connect the new
DC Power Plug
and
the
Micro USB
cable into the power plug
and Master Control Unit.
9. Reattach the top plates removed in step
3, but
do not
install the top center screw
10. Place the metal end of the stage
connection assembly against the stage,
and using the remaining center screw
attach the assembly directly to the
stage. Install the additional 2 screws on
the front of the stage, further securing
the connection assembly.
11. Place the
marquee
onto the top of the
monitor assembly and secure with 4
screws.
Plug the
marquee’s power plug
in after
securing.
