SteppIR SARK-110, Руководство пользователя

Страница: 48 / 78

SteppIR
SARK-110
User’s Manual
Rev 1.1.7 October 29 th , 2014 - 48 - © Melchor Varela – EA4FRB 2011-2014
In frequency sweep mode the signal frequency will sweep across a range of provided frequencies.
To change the sweep parameters, use Navigator A to highlight
«Sweep»
in the main menu and
press the Select [ ■ ] button to validate the different sweep parameters.
The following parameters should be supplied:
 Sweep:
o
None Continuous frequency mode
o
Frequency Sweep frequency mode
 Repeat:
o
Continuous Continuous signal generation
o
Single Signal generator stops after a single sweep
o
Count: Signal generator stops when number of sweeps reach count

<Count>
 Function:
o
Linear Linear frequency increase or decrease
o
Log Logarithmic frequency increase or decrease
o
Bi-Linear Start-Stop-Stop-Start sweep (Linear)
o
Bi-Log Start-Stop-Stop-Start sweep (Log)
 Start Frequency:
o
<Start> Hertz
 Stop Frequency:
o
<Stop>
Hertz
 Number of points:
Number of steps between start and stop frequency
o
<Points>
 Delay uS: Step time
o
<Delay uS> Micro-seconds