SteppIR SARK-110, Руководство пользователя

Страница: 33 / 78

SteppIR
SARK-110
User’s Manual
Rev 1.1.7 October 29 th , 2014 - 33 - © Melchor Varela – EA4FRB 2011-2014
to provide precise information in the plotted areas. Their positions can either be user-selected or
automatically tracked. They are also useful for indicating characteristic points in the plot.
Use Navigator A to highlight «Mode» in the main menu. Press the Select [ ■ ] button to activate the
Mode popup submenu and use Navigator B to highlight «Scalar Chart» submenu mode option.
Finally press the Select [ ■ ] button to enter into Scalar Chart mode.
The analyzer performs the measurements and updates the plot continuously, unless it is stopped by
pressing the Run/Hold
[ ►|| ]
button. The results of the measurements are kept in internal memory
and plotted on the display to permit user analysis. The measurements can be resumed at any time
by pressing the Run/Hold
[ ►|| ] button again. Measurement data can be stored at any time on the
internal disk and restored later for review through different options in the «File» menu.