background image

Page 

6

Molnar 4 Post Hoist 

SM4

X

Customer's Responsibility

This operating manual should always be kept in the immediate vicinity of the machine, accessible for 

the personnel entrusted with installation, operation, maintenance and cleaning. The machine must 

only be operated in technically perfect and safe condition. Always ensure free access to all safety 

features and check these at regular intervals.

The  customer  is  obliged  to  determine  compliance  of  work  safety measures specified with the 

current status of legal statutes and to observe any new regulations over the  entire  period  in  which 

the  machine  is  used. 

T

he  laws  on industrial safety and regional directives and regulations valid at 

the  place  of  use  of  the  machine  are  to  be  complied  with.  The  generally  valid  notes  on 

industrial  safety  and  accident  prevention  instructions  as  well  as  the  valid  environmental 

protection regulations applicable at the place of use are to be observed and adhered to alongside 

the notes on industrial safety in this operating manual.

The customer and personnel authorized by him/her are responsible for the disruption-free operation 

of  the  machine  as  well  as  for  unambiguous  determination  of  responsibilities  during  installation, 

operation, maintenance and cleaning of the machine.

Details of the operating manual are complete and must be adhered to without limitation!

Furthermore, the customer must also ensure that:

Other dangers that result from special working conditions at the place of use are determined in

a risk assessment.

All other instructions and notes on safety that result from the risk assessment of workplaces on

the machine are summarized in operating instructions.

Intended Use

Operational safety is only guaranteed when adhering to the intended use of the device.

This lifting device is specially developed to lift motor cars and we strongly recommend not to lift any 

other equipment with this automotive lift.

The  lifting  platform  has  been  designed  and  built  for  the  use  inside  workshops.  Use  of  the  lift  for 

under-sealing of cars and car wash is not allowed.  Riding, climbing and/or standing on the lifting 

platform  as  well  as  using  it  for  lifting  or  lowering  loads  other  than  the  ones  specified  above  or 

installing and operating it outside in an unprotected environment is prohibited.

ATTENTION!

Any  other  use  of  the  device  that  differs  from  this  or  exceeds  this  is  prohibited  and  is  considered 

unintended use!

Claims  of  any  kind  against  the  manufacturer  and/or  his  authorized  representatives resulting  from 

damage caused by unintended use of the device are excluded. The customer is solely liable for any 

damage occurring during unintended use. Intended use also includes correct adherence to assembly, 

operating, maintenance and cleaning instructions.

Содержание MOLNAR SM Series




















Отзывы: