Page
14
Molnar 4 Post Hoist
SM4
X
0
CLEANING
Cleaning of hoists helps prevent corrosion damage.
Corrosive fluids such as brake fluid, oil, fuel or other solvents must be wiped off immediately,
otherwise damage will occur to the coating.
Special attention must be paid to the corrosive effect of salt in autumn and winter periods.
The cleansing agents must not have any abrasive effect, nor contain solvents.
The hoist must be cleaned at least once a week.
The hoist must be cleaned with a non-corrosive cleansing agent.
Clean and wipe the hoist according to the following scheme:
When:
Where:
How:
Remarks:
Every week
Platforms
Clean and wipe
Wearing surfaces must
be slightly oiled
Drive-on ramps
Post / base plate
Cross beams
The manufacturer does not accept any claim concerning the paint peeling off or corrosion damages
caused by missing or insufficient cleaning or maintenance.
Repair of damages:
Repair of damages on the coating must be carried out immediately in order to minimize the extent of
the repair.
The damages will typically be:
Damages which do not affect the metal surface but affects the coating itself
Damages going down into the metal surface.
Repairs:
Contact the manufacturer for guidance.
Please state RAL number of paint.
