Stenhoj MAJOR 7000, Инструкция по эксплуатации и обслуживанию

Страница: 25 / 52

T61741
Revision:
24
STENHØJ MAJOR
CONTROL LIST FOR MAJOR
CHECK that the technical manuals are delivered with the lift (installation instructions, operation and
maintenance instructions, spare parts list, the EC-certificate of conformity, the electrical diagram in the control
box)

CHECK that all components are enclosed (see installation instructions and the accessory kit packing list) 
CHECK the lift for any paint damages occurred during transportation, or paint faults from the
production

Follow the installation instructions delivered with the lift and check the following points: 
PLATFORMS AT
FLOOR LEVEL Cross beams rest against their stops at floor level (all cables loose) 
Posts are vertical in both directions 
Right-hand platforms can be slid freely along cross beams 
The two nuts for cables at top of posts are counter-tightened 
Eccentric brake sensory rollers are free to rotate on axles 
Oil level in accordance with "oil level control" (oil level: middle of sight glass)

Important signs/decals:
* Max. capacity

* Maint safety instructions (placed on control post) 
* Several warning labels 
* Name plate with CE-label 
PLATFORMS
HANGING IN
RATCHETS AT
APPROX. 1 M'S
HEIGHT High pressure hose fittings are tight 
Armoured hose hangs freely as a "U" without strain 
Air system checked for leaks 
Platforms and cross beams are horizontal when lift is parked in ratchets 
Cables are correctly fitted (see installation drawing) 
NON LOADED
LIFT Excess-pressure valve is activated when platforms reach the topmost
position (audible)

LOADED LIFT
(APPROX. 1.5 T) Platforms can be parked in the topmost ratchet holes (cable adjustment) 
Platforms can be released and lowered from topmost ratchet holes
(tolerance approx. 20 mm)

Nylon slide blocks on cross beams must not touch (tolerance 0-0.5 mm)
(post adjustment – cross beam adjustment). Check that ratchet rail does not fret the
cross beam.

Platforms horizontal when hanging in cables with load and no air connected.
If the lift is adjusted correctly, ONE click is to be heard from the ratchets when raising
the lift. If not - adjust.

INSTRUCTION The end-user has been thoroughly instructed in correct use and maintenance 
CONCLUSION Write any defects/faults on the enclosed note-scheme and return/fax a copy of this
control list (both pages 24 and 51) to:
STENHØJ
A/S
Barrit Langgade 188-190
DK - 7150 Barrit
Fax: +45 76 82 13 31
RECEIPT The above check-up has been made and the lift has been tested with a vehicle
(total weight kg)
Serial No. of lift: Installation date:
Responsible workshop manager: Fitter: