INSSTE362RNP0609
Night mode timer adjustment procedure
1. If necessary, adjust the Day/Night mode set points at the
desired temperatures. If needed, switch from one mode to
the other by simultaneously pressing down the two but-
tons and releasing them immediately.
2. From the Night mode, simultaneously press down the two
buttons for more than 3 seconds until the moon icon blink-
ing and the letter H appear.
3. If needed, adjust the timer by pressing down the top but-
ton to increase the value, or the bottom button to decrease
it. The adjustment range is from 1 hour to 999 hours. To
quickly scroll through timer values, press and hold down
the button.
4. When the adjustment is completed, release the buttons
and wait for 5 seconds to exit the adjustment function.
NOTE: The Night mode timer will be automatically reinitialized
to the latest recorded value when switching from the
Day mode to the Night mode. It is not necessary to
readjust the timer every time you switch to the Night
mode. The timer is also reinitialized when this value is
adjusted. Once the timer has completed its cycle and
when the thermostat is in the Day mode, you must
manually return to the Night mode. If you want to au-
tomatically return to the Night mode, the Automatic
mode must be selected.
Automatic mode
The Automatic mode, which is associated to the Night mode
timer, allows alternating between the Day/Night modes and
the two corresponding set points over a 24-hour period.
Once activated, this mode allows an automatic return to
the Night mode after 24 hours. The Automatic mode allows
you to define two periods in a single day with different set
points.
