INSSTE362RNP0609
5. Take the wires from the wall through the hole at the base
of the thermostat and connect them using the supplied
solderless connectors. When making the connection with
aluminum wire, make sure that you are using connectors
identified CO/ALR. Please note that the thermostat wires
do not have polarity. Therefore, the way they are connect-
ed is not important.
2-wire
installation
6. Reinstall the front part of the thermostat on the mounting
base and tighten the screw at the bottom of the unit.
7. Turn on the power.
8. Set the thermostat to the desired setting (see the following
section).
