INSSTE362RNP0609
Lock option
It is possible to impose a maximum temperature set point
by activating this mode. Then, it becomes impossible to
exceed this set point, regardless of the current mode (Day/
Night). However, it is still possible to lower the set point at
your discretion.
Procedures to activate lock mode
1. To activate the lock option, from the day mode adjust the
day setpoint to the desired maximum temperature.
2. From the Day mode, simultaneously press down the two
buttons for more than 13 seconds, until the Lock icon dis-
plays (note that the °C or °F will appear after 3 seconds
continue to keep both buttons pressed down or you will
find yourself in the degree adjustment mode or in fan
mode)
3. Release the buttons. The thermostat is now locked.
Procedures to deactivate lock mode
1. To deactivate lock mode, start by cutting thermostat power
at circuit breaker and wait at least 20 seconds.
2. Turn thermostat power back on and the Padlock icon will
flash for a maximum of 5 minutes.
3. Simultaneously press both buttons for 13 seconds. (Note
that the pictogram displaying the degrees (C or F) will blink
after three seconds, it is important to keep the two buttons
pressed down to avoid switching to the adjustment or fan
mode). After 13 seconds, the padlock icon will disappear
and the degrees symbol (C or F) will stop flashing; indi-
cating that the lock mode is deactivated. Release the but-
tons.
