INSSTE302P0514
10
Programming procedure of the Automatic mode
Programming the Automatic mode can be done in the Automatic mode or the Manual mode.
1. Out of any adjustment mode, press down the button during 3 seconds and release it. It then enters
into the programming of period 1 of the 5 days of the week. The 5 days of the week (L/M, M/T, M/W,
J/T, V/F), the period 1 (
) and the associated programming (hours and set point) are displayed.
Note that the time displays --:-- and the set point displays --.-- if there is no programming for the period.
Note: if no programming is required for the period, simply press down the
button. It then
automatically switches to the next adjustment period.
2.
The two hour digits of the period flash and can then be adjusted with the and buttons. Confirm
the adjustment using the
button.
3.
The two minute digits of the period flash. Use the and buttons to adjust by intervals of 15
minutes. Confirm the adjustment by pressing down the
button.
4.
The set point temperature of the period is flashing. Adjust the set point using the and buttons.
Confirm your selection by pressing down the
button.
5.
The programming of this period is over. The programming of the next period is displayed and you
return to step 2.
6.
At the end of the programming of the 4 periods of the week days, you enter into the programming
period 1 of the two days of the weekend. The two days of the weekend (S/S, D/S), the period 1 and
the associated programming (hours and set point) are displayed. The programming of the weekend
periods is made in the same manner as for the periods of the week days (steps 2 to 5).
At the end of the programming period 4 of the weekend, the programming is completed and the
thermostat returns to normal operation.
It is possible to exit the Automatic mode’s programming at any time:
• By pressing down the button.
• By not pressing down any buttons during 1 minute.
In any case, all programming is saved.
Erasing of the programming
When programming the Automatic mode, it is possible to delete a programming period.
1. Enter into the programming of the Automatic mode and reach the period, as described in the previous
section.
