11
INSS0414
two buttons for at least 3 seconds. The
icon will appear. If the Single
programming mode was already activated, the same procedure should be
used to deactivate it.
4. When the adjustment is completed, release the buttons and wait for 5 seconds
to exit the adjustment function.
NOTE: It is always possible to manually change the Day/Night mode during
a 24-hour cycle. However, any manual return to the Night mode will
re-initialize the Night mode timer to the latest value recorded, which
modifies the cycle in progress. In all cases, at the end of the 24-hour
cycle, the thermostat will return to the Night mode and start a new
cycle. It is thus not necessary to readjust the Single programming
mode when a manual change is made to the Day/Night mode.
When turning back on after being powered off (because of a power
failure, for example), the Single programming mode is deactivated, and, if
previously activated, the
icon will blink. The blinking will stop as soon
as you press down a button.
