10
INSS0414
Single programming mode
The Single programming mode, which is associated with the Night mode timer,
allows alternating between the Day/Night modes and the two corresponding set
points over a 24-hour period. Once activated, this mode allows an automatic
return to the Night mode after 24 hours. The Single programming mode allows
you to define two periods in a single day with different set points.
For example, if the Single programming mode is activated and the Night mode
timer is set at 8 hours, the thermostat will be operating in the Night mode for 8
hours at the night temperature set point. Then, it will return to the Day mode for 16
hours operating at the day temperature set point. At the end of the 24-hour cycle,
the thermostat will return to the Night mode, and the cycle will start over. The 24-
hour cycle starts with the Night mode as soon as the Single programming mode
is activated. The Single programming mode activation should be made when you
want to return to the Night mode. The normal course of a cycle in the Single
programming mode is as follows:
1- Night mode: activated for the duration of the Night mode timer cycle. It returns
to the Day mode when the timer cycle is completed.
2- Day mode: activated for the remaining time of the 24-hour cycle. It returns to
the Night mode at the end of the 24-hour cycle.
Adjustment procedure of the Single programming mode:
1. If necessary, adjust the Day/Night set point at the desired temperatures. If
needed, switch from one mode to the other by simultaneously pressing down
the two buttons and releasing them immediately.
2. From the Night mode, simultaneously press down the two buttons for more
than 3 seconds. If needed, adjust the timer by pressing down the top button to
increase the value, or the bottom button to decrease it. The Night mode timer
adjustment range is from 1 hour to 23 hours in the Single programming mode.
To quickly scroll through the timer values, press and hold the bottom button.
NOTE: If you set the timer to any value exceeding 23 hours, it will be impossible to
activate the Single programming mode and if it was activated, the Single
programming mode will be deactivated.
3. Activate the Single programming mode by simultaneously pressing down the
