12
INSS0414
Display in either degrees celsius/Fahrenheit
The thermostat can display the ambient temperature and the set point in degrees
Celsius (standard factory setting) or Fahrenheit.
1. From the Day mode, simultaneously press down the two buttons for 3 seconds.
The Celsius/Fahrenheit symbol will blink after 3 seconds. (For the backlit
models, press down the two buttons for 8 seconds. Note that the backlight
will blink after 3 seconds, but you must hold down the buttons. The Celsius/
Fahrenheit symbol will blink after 8 seconds.) Release the buttons.
2. Press down the top button to switch from the degrees Celsius to the degrees
Fahrenheit, and conversely. The degree Celsius or Fahrenheit symbol will be
displayed.
3. When the adjustment is completed, release the buttons and wait for 5 seconds
to exit the adjustment function.
heating power indicator
The level of power used to maintain the temperature at the set point is expressed
as a percentage indicated by the number of bars in the thermometer displayed. The
heating power used is displayed as follows:
4 bars = 75% to 100%
3 bars = 50% to 75%
2 bars = 25% to 50%
1 bar = 1% to 25%
0 bar = no heat
Frost-free warning
The Snowflake icon is displayed when the temperature set point is between 3°C
(37°F) and 5°C (41°F). A minimum temperature will be maintained to ensure frost
control.
Security mode
It is possible to impose a maximum temperature set point by activating this
