Stell SHO 1110, Универсальные инструкции по монтажу

Страница: 3 / 44

3-EN
IMPORTANT:
• Before installation and use, carefully read this guide and keep it for future use.
• When using electrical tools for tightening bolts, please pay increased attention.
• When tightening bolts make sure not to strip the thread. It could damage the video table / holder.
Don‘t install this product into a wet or otherwise damaged wall. Fastening materials, which are
supplied with the product are designed for installation on to walls from massive wood, bricks or
concrete. For assembly on to walls from other materials consult an expert.
• Do not disassemble nor repair the product on your own.
• Never install or service this product if it shows signs of damage. If you are unsure, contact your
supplier. Stell takes no responsibility for the faulty installation of this product.
• The product must be placed in such a way that the power socket is accessible after installation.
• Sharp edges of this product may cause injury.
• This product is not designed to be handled nor installed by small children or uninstructed persons,
unless they are under the supervision of persons responsible for ensuring safety during handling
or installation of the product. Children should be under supervision to ensure that they do not
tamper with the product. Do not allow children to hang on the product nor to handle it in any other
way. If this is not the case, serious injury may occur. Never insert fingers nor other items into the
product‘s mechanism. Persons could be injured or property damaged.
• Use this product in accordance with the user‘s manual and its intended application.