Stel Iron Mig 221 MULTI, Инструкция по эксплуатации

Страница: 20 / 41

6943300010
20
SPOOL GUN & REMOTE
CONTROL KIT
There is the possibility to connect a REMOTE
CONTROL or a SPOOL GUN TORCH like optional.
The connection specifications you will find inside
the kit.
For activate the SPOOL GUN press the
FUNCTION SELECTION button (rif.10) to go in the
MIG SETUP page.
Press the button MODIFY and with the button
SELECT to select the menu SPOOL GUN : ON –
OFF.
Then press the button CHANGE to underline in
yellow the word ON or OFF.
Now press the button V ( green ) to confirm the
choice.
If the SPOOL GUN is selected on the main screen
appears the symbol of spool gun torch.
SETTING UNIT MEASURING
WIRE SPEED
There is the opportunity to set the wire speed in
m/min or ipm.
Press the FUNCTION SELECTION button (rif.10)
to go in the MIG SETUP page.
Press the button MODIFY and with the button
SELECT to select the menu UNIT : m/min – ipm.
Then press the button CHANGE to underline in
yellow the word m/min or ipm.
Now press the button V ( green ) to confirm the
choice.
On the main screen is possible to see the wire
speed in ipm ( minimum 055 , maximum 629 ) .
The thickness will be also in inches .
SCREENS DESCRIPTION
MIG SETUP
FACTORY DEFAULT
RESTORE
This function is used to return the machine settings
to factory defaults .
Press the button Selection Function (rif.10) to go in
the MIG SETUP page.
Press the button MODIFY and with the button
SELECT to select RESTORE FACTORY
DEFAULT.
Press the button CHANGE and on the screen you
will see written “ DO YOU WANT TO RESTORE
FACTORY DEFAULT DATA ?”
To restore the default data press the V (green
button )
The machine will set automatically in this mode :
Program Fe 0,8mm Synergic
3,8 m/min
0,00V
I=57 A
V=16,3V
Thickness=1mm