Stel Iron Mig 221 MULTI, Инструкция по эксплуатации

Страница: 14 / 41

6943300010
14
protective glass according to standards (degree of
protection DIN 10).
- warn people in the vicinity not to look directly at
the arc.
PREVENTION OF FIRE
Welding produces splashes of molten metal.
Take the following precautions to prevent fire:
- ensure that there is a fire extinguisher in the
welding area.
- remove all inflammable material from the
immediate vicinity of the welding area.
- cool the welded material or let it cool before
touching it or putting it in contact with combustible
material
- never use the machine for welding containers of
potentially inflammable material. These containers
must be completely cleaned before they are
welded.
- ventilate the potentially inflammable area before
using the machine.
- do not use the machine in atmospheres
containing high concentrations of powders,
inflammable gases or combustible vapours.
GENERAL
CHARACTERISTICS
This new series of welding machines with
electronic
regulation controlled by a
microprocessor ,allows you to achieve excellent
welding
quality, thanks to the advanced
technologies applied. The microprocessor circuit
controls and optimises the transfer of the arc
irrespective of the load variation and of the
impedance of the welding cables.
The controls on the front panel allow easy
programming of the welding sequences depending
on the operating requirements.
The inverter technology used has allowed the
following to be obtained:
- machines with extremely low weight and compact
dimensions;
- reduced energy consumption ;
- excellent dynamic response;
- very high power factor and yields;
- better welding characteristics;
- viewing of the data and of the set functions on the
display.
The electronic components are enclosed in a
sturdy structure that is easy to carry and cooled
with forced air by fans with low noise production.
N.B. This welding machine is not suitable for
thawing pipes.
DELIVERY OF THE MATERIAL
The package contains:
- N. 1 welding machine
- N. 1 instruction manual
- N. 1 setting up kit
Check that all the material listed above is included
in the package. Inform your distributor if anything is
missing. Check that all the material listed above is
included in the package. Inform your distributor if
anything is missing. Check that the machine has
not been damaged in transport. If you see any sign
of damage, consult the COMPLAINTS section for
instructions. Before working with the machine, read
the SAFETY and USE section of this manual.
COMPLAINTS
Complaints for damage during transport : If your
equipment is damaged during transit you must
present a claim to the carrier.
Complaints for faulty goods : All the equipment
shipped by STEL is subjected to strict quality
control. However, if your equipment does not work
properly, consult your authorised dealer.
TECHNICAL DATA
A) IDENTIFICATION
Name, address of the manufacturer
Type of welding machine
Identification with reference to serial number
Symbol of the type of welding machine
Reference to the construction standards
B) WELDING OUTPUT
Symbol of the work process
Symbol for welding machines suitable for working in
an environment with a high risk of electric shock.
A
B
C
D