35
STEL s.r.l.
– Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail: stel @ stelgroup.it
http: www.stelgroup.it
HI-MIG 353/503S-P 400V 3F
COD. 6907900030
SAFETY
ENGLISH
1.0 - SAFETY
1.1 - WARNINGS
ELECTRIC SHOCK CAN KILL
- Disconnect the machine from the power line before working on the generator.
- Do not work with deteriorated cable sheaths.
- Do not touch bare electrical parts.
- Ensure that all the panels covering the current generator are firmly secured in
place when the machine is connected to the mains.
- Insulate yourself from the work bench and from the floor (ground): use isolating
footwear and gloves.
- Keep gloves, footwear, clothes, the work area and this equipment clean and dry.
PRESSURISED CONTAINERS CAN EXPLODE IF WELDED.
When working with a current generator:
do not weld pressurised containers .
do not weld in environments containing explosive powders or vapours.
THE RADIATIONS GENERATED BY THE WELDING ARC CAN DAMAGE THE
EYES AND CAUSE BURNING OF THE SKIN.
- Provide suitable protection for the eyes and body.
- It is indispensable for contact lens wearers to protect themselves with
suitable lenses and masks.
NOISE CAN DAMAGE YOUR HEARING.
- Protect yourself suitably so as to avoid damage.
FUMES AND GASES CAN DAMAGE YOUR HEALTH.
- Keep your head out of the reach of fumes.
- Provide suitable ventilation of the work area.
- If the ventilation is not sufficient, use an exhaust fan that sucks up from the bottom.
HEAT, SPLASHES OF MOLTEN METAL AND SPARKS CAN CAUSE FIRES.
- Do not weld near inflammable materials.
- Avoid taking any type of fuel with you such as cigarette lighters or matches.
- The welding arc can cause burns. Keep the tip of the electrode far from your body
and from other people
’
s.
It is forbidden for people with PACEMAKERS to use or come near the
machine.
