7
STEINDORFF
®
2.2.5 Install the color filter (Fig. 9-10)
Put the filter into the jack of the illumination system.
★
There is three type of color filter. The color is
blue, yellow and green.
2.2.6 Connecting the Power Cord (Fig. 11-13)
★
Do not force on the Power Cord. The cable and
wire
are easier to be damaged when bended or wrapped.
1.
Before connecting the power cord, switch the main
On-Off
①
to “O” (off).
2.
Plug the power cord
②
into the socket
③
on
microscope safely. Make sure be connected.
3.
Plug the power cord
④
into the power source
Socket
⑤
safely. Make sure be connected.
★
Do use the supplied power cord all the time. If
lost or damaged, select the same standard cord,
please.
★
This machine has High-Band voltage. It can
adapt any voltage between 100V and 240V.
2.2.7 Replacing the fuse (Fig. 11-12)
Do remember to turn the main switch
①
on the
state of “O” (off) before replacing the fuse, and
unplug the power cord. Rotate the fuse
⑥
kits out
of the holder
⑦
by the “--”type screwdriver,
replace a new fuse, then rotate back to the holder
again
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13