8
STEINDORFF
®
3)
Electrical Part
PROBLEM
CAUSE
SOLUTION
The lamp ca
n’t light
when turning on the
switch
No power supply
Check the connection of the
power cord
The LED lamp is burnt out
Replace it
The lamp burns out
suddenly
The voltage is too high
Use the specified AC adapter,
if the problem is not solved,
contact with the service
department
The brightness is not
enough
Use a substandard AC adapter
Use the specified AC adapter
The voltage is too low
Add the voltage
9. The software ScopeImage 9.0
1) Installation
1. Link the digital Binocular head with PC by the USB cable, the system will find the new device, and
then run the driver under the CD, please follow the clue to finish the installation.
Attention:
please link the camera with PC before running the driver installation; when warning
dialog appears, just click
‘Continue Anyway’, as the pictures show below:
2. Install the software, follow the clue to finish the installation, after the installation, there will be a
shortcut icon on the Desktop and the Start Menu.
3. Please install the video codec
‘wmv9VCMsetup.exe’, it can compress the video files when recording,
and greatly reduce the size of the video files. If you cannot do record, please check whether
you have installed the video codec already.