STEINDORFF NYMCS-1701, Руководство пользователя

Страница: 3 / 35

2
STEINDORFF
®
User Notices
Safety Note
1.
The epi-fluorescent attachment is a precise instrument. Open the box carefully, and avoid dropping the
accessories to ground and causing damage to them.
2.
Do keep the instrument out of direct sunlight, high temperature or humidity, dusty and virations.
3.
Make certain that the burner is installed correctly and all cords are connected firmly.
4.
Do not open the lamp housing while it is turned on or for at least 10 minutes after it has been turned
off. Lamp housing parts are extremely hot and cause burns if touched.
5.
Always be sure to ground (earth) the equipment.
6.
Verify that the voltage and the frequency of the AC mains outlet match the setting of the voltage switch
and the frequency switch on the rear of the power supply unit.
7.
Always use the power cord provided and make sure that the main switch is moved to “O”(OFF) before
connecting the power cord plug to the wall outlet.
8.
To prevent any hazard, always turn the main switch on the power supply unit to “O” (OFF), unplug the
power cord plug from the mains outlet before replacing the burner or the fuse, and wait for at least 10
minutes before replacing the burner. (Be sure to use a GCQ-100
mercury
burner.)
9.
To prevent obstruction of the air flow, it is important to leave enough space around and above the lamp
housing.
Safety Symbol
Symbol Meaning
The surface is very hot, not touch by your hands
Before using, please read the instruction carefully, improper operation will result in bodily
injure or instruction malfunction.
The main switch on
The main switch off