manualshive.com logo in svg

Steinberg NUENDO 2, Руководство пользователя

Поделиться
Скачать
Steinberg NUENDO 2 Скачать руководство пользователя страница 47

– 47 –

Working with two DS2416 Cards

If you have two DS2416 cards installed, these can be connected using 
the SI/SO (Serial In/Out) connections on the cards, giving you access 
to integrated 48-channel mixing with 4 separate on-board FX units.

1.

Use the supplied serial cables to connect the SO output on card A to 
the SI input on card B, and vice versa.

The two cards should be connected “both ways”. Follow the instructions in the docu-
mentation that was included with the cards.

2.

Open the ASIO Control Panel and select the “Yamaha DS2416 2 
cards” Preset.

3.

Open the Routing window.

This will now have two additional columns containing output routing and wordclock 
settings for the second card.

4.

Select the “Ext. SI” option in the Wordclock section for one of the 
cards.

This will cause one of the DS2416 cards to receive wordclock from the other card, en-
suring stable synchronization. In effect, the card for which you activated the “ext. SI” 
option is now the “Slave” and the other card is the “Master”.

Once you have connected the two cards as described above, there 
will be 16 Output Buses in the VST Outputs window, and 8 Input pairs 
in the VST Connections window. Furthermore, the Input Console will 
hold the double number of channels (40 input channels, 8 effect return 
channels and two Stereo Mix channel strips).

Содержание NUENDO 2
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды