Steinberg NUENDO 2, Руководство пользователя

Страница: 10 / 55

– 10 –
The Default Routing of signals from DS2416 into Nuendo
There are eight separate “lines” from the DS2416 card into Nuendo. In
Nuendo, these correspond to the four Audio Input pairs (see
page 5 ).
In the DSP Factory Input Console window, the default configuration
uses the eight bus sends to route signals from the audio card into VST
(for recording). The following default routing scheme is used:
This means that to record something through the DSP Factory into
VST, you only need to activate the appropriate Bus Sends for the de-
sired DS Channels. From that point, the recording procedure is the
same as when you run Nuendo with “standard” audio hardware.
DS 2416 Bus Send VST Input
Bus 1 PCI Rec 1/2 1
Bus 2 PCI Rec 1/2 2
Bus 3 PCI Rec 3/4 1
Bus 4 PCI Rec 3/4 2
Bus 5 PCI Rec 5/6 1
Bus 6 PCI Rec 5/6 2
Bus 7 PCI Rec 7/8 1
Bus 8 PCI Rec 7/8 2