manualshive.com logo in svg

Steinberg NUENDO 2, Руководство пользователя

Поделиться
Скачать
Steinberg NUENDO 2 Скачать руководство пользователя страница 23

– 23 –

In the lower half of the Dynamics panel, you will find the actual controls:

Parameter

Description

Threshold

Determines the threshold level at which the dynamics processor is “trig-
gered”. Whether signal levels above or below this level will trigger the 
processing, depends on the selected dynamics type.

Ratio 

(Comp, Expander and Compander types only). Determines the amount 
of compression/expansion. For the Compander types, this determines 
the compression, while the expansion ratio is fixed.

Attack

This determines how soon the signal is affected (compressed, gated, ex-
panded, etc) once the dynamics processor has been triggered.

Release

(Comp, Expander and Compander types only). Determines how soon 
the dynamics processor returns to normal gain once the signal level 
goes back below/above the threshold level.

Gain / MGain (Comp, Expander and Compander types only). Sets the output signal 

level. Use this to compensate for overall level changes caused by the dy-
namics processing.

Knee

(Comp and Expander types only). Determines how compression/expan-

sion is applied at the threshold point. “Hard knee” means that the speci-
fied compression/expansion ratio is applied as soon as the threshold level 
is reached, while the five “Soft knee” settings apply the compression/ex-
pansion gradually for a more natural sound.

Range 

(Gate and Ducking types only). Determines the amount of attenuation 
when the processing is triggered, with lower values resulting in more at-
tenuation. If you want the Gate/Ducker to mute the signal completely 
when triggered, set this parameter to its lowest value (-70 dB).

Hold 

(Gate and Ducking types only). Determines how long the gate stays 
open (or how long the ducking effect remains active) once the trigger 
signal has fallen below the threshold level. 

Decay

(Gate and Ducking types only). Determines how fast the gate is closed 

(or, with Ducking, how fast the gain returns to normal) after the Hold time.

Width

(Compander types only). This determines how far below the threshold 
level expansion is applied to the signal. If the Threshold level is -10 dB 
and the Width is set to 20 dB, expansion will be applied to signals with 
levels below -30 dB (20 dB below threshold).

Reduction 
Meter

This meter indicates the dynamic gain reduction.

Содержание NUENDO 2
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды