Steinberg Cubase SL 3, Руководство по эксплуатации

Страница: 24 / 54

CUBASE SX/SL
7 – 24 Mackie HUI
Specifications
Mackie HUI can control any number of channels in groups of 8.
• Use the left and right Bank buttons to select channels 1-8, 9 -16 etc.
• Use the left and right Channel buttons to shift the fader assignment in
steps of one channel.
• The Fader button in the Auto Enable section is used to disable/enable
the motors.
• The Mute, Pan, Send, Plug In and Send Mute buttons in the Auto En-
able section are currently not supported.
• Use the Rec/Rdy buttons to arm a track for recording.
• Use the Select buttons to select a single track for detailed settings.
• With the Mute and Solo buttons you can mute or solo a track.
• Use the Default button to un-solo all tracks.
• Use the Assign button to un-mute all tracks.
• To the right of the time display, you find an LED labeled “Rude Solo
Light”. This LED lights up as soon as any channel is soloed.
• Use the Insert buttons to bypass all inserts of one track.
Pan button in the Select Assign section:
• Fader Set: panning left/right or panning front/rear. Press button repeatedly to
cycle through the assignments (the eight V-Pots control the pan parameters).
• V-Sel button in the Select Assign section: monitor track.
Send A to Send E buttons in the Select Assign section:
• Fader Set: Send 1 level to Send 8 level (Send A to Send D assigns Send 1 to
Send 4, Send E assigns Send 5 to Send 8: press button repeatedly to cycle
through the assignments).
• V-Sel button in the Select Assign section: send on/off switch (depending on
selected Send).
• V-Sel button with Shift in the Select Assign section selected: pre/post fader
switch (depending on selected Send).