Steinberg Cubase SL 3, Руководство по эксплуатации

Страница: 27 / 54

CUBASE SX/SL
Mackie HUI 7 – 27
• The Scrub and Shuttle buttons are currently not supported.
• Pressing the cursor keys located to the left of the jog wheel is the
same as pressing the arrow keys on your computer keyboard.
When the Mode button is selected, pressing the cursor keys will control zooming in
the Project window.
• Use the Scroll control in the DSP Edit/Assign section to scroll through
the pages of one parameter group.
• Use the Compare button in the DSP Edit/Assign section for page up.
Hold down the Shift button in the Keyboard Shortcuts section and press the Compare
button to jump to the last page.
• Use the Bypass button in the DSP Edit/Assign section for page down.
Hold down the Shift button in the Keyboard Shortcuts section and press the Bypass
button to jump to the first page.
• Use the Insert/Param button in the DSP Edit/Assign section to switch
the display of names of the available parameters in the lower row on or
off.
F1 button: Selected Channel: EQ
• Page 1 - Gain, Frequency, Q and Enable for the lo band
• Page 2 - Gain, Frequency, Q and Enable for the lo mid band
• Page 3 - Gain, Frequency, Q and Enable for the hi mid band
• Page 4 - Gain, Frequency, Q and Enable for the hi band
• Buttons above dials: bypass EQs
F2 button: Selected Channel: Sends
• Pages 1 to 8 - Level, Enable, Pre/Post and Bus for Sends 1 to 8
• Buttons above dials: bypass sends
F3 button: Selected Channel: Routing
• Page 1 - Output Bus, Monitor, Input Bus, Input Gain
• Page 2 - Input Phase
• Buttons above dials: monitor
• For a description of the functionalities for the F4 button: Selected
Channel: Inserts, F5 button: Global mode Send Effects, F6 button:
Global mode Master Effects, F7 button: Global mode Instruments,
see the separate pdf document “Mackie Control and Cubase SX/SL”.