4
DIAGRAM A
2
WALL
CHANNEL
22mm
Minimum to Maximum Table
SHOWER SIZE
DOOR SET
RETURN PANEL
900 x 900 2 Sided
856mm - 868mm
861mm - 873mm
1000 x 1000 2 Sided
956mm - 968mm
961mm - 973mm
1200 x 900 2 Sided
1156mm - 1168mm
861mm - 873mm
NOTE:
All measurements assume the floor is level, the walls are plumb and all surfaces are flat. Any
variation must be adjusted for in the measurements provided.
INSTALLATION STEP 1
2-SIDED ACRYLIC
BEFORE YOU START: Decide on the two Door-Set Layout options offered.
OPTION 1:
Standard version is outlined in these instructions from page 4 to 9.
OPTION 2:
This varies from standard option using vertical seals either side of the door. The door gaps
will be 4mm wider than standard version. Start at the outset if applying this option.
Go to
appendage page 10 to get all the details
STEP 1: Wall Channel positioning and attachment
Tile Tray Set-Out:
Use the Min to Max
Table to position the glass panels to the tray.
Channel Fixing:
Do not penetrate the tiles and
waterproofing but bond full width and length of
channels with Bostik V60 Structural Silicone. Leave
a minimum of 36 hours prior to installing shower.
Acrylic Tray Set-Out:
Mark position on
acrylic tray and check against the Min to Max Table.
Channel Fixing:
Plumb up channels, drill 2mm hole
in liner. Apply 7mm bead of silicone sealer the full
length of channel and fasten with 3.5x4mm screws.
ACRYLIC
TRAY
